Basic Info.
Product Description
PDF14S is a PDF temperature recorder of PCsensor,high-precision, low-power and reusable, which can record up to 8000 temperature data.It can be used in dairy products, frozen food, seafood, fry, medicine, blood, vaccine, high-tech sensitive products, cold chain transportation, ambient temperature detection and other occasions.DescriptionHigh precision,lower power consumption,reusable.
Small size,easy to carry.
Set up or view data via USB interface.
Synthesize the collected data into a PDF file format,which is convenient for you to view on any system.ParametersProduct Name: PDF Temperature Recorder Product
Model: PDF14S
Data Interface: USB
Number of Data Records: 8640
Recording Time: not to exceed 6 months (recommended)
Sensor: built-in semiconductor sensor, housing temperature sensing
Repeatable Record times: 500 times
Stop Method: record full or plug the device into the computer USB port.
Power Supply: rechargeable lithium battery
Charging Method: when the device is plugged into the USB interface
Fully Charged Time: 2 hours
Working Voltage: DC 3.7V
Quiescent Working Current: <10 uA
Temperature measurement range: -30ºC ~ +70ºC (accuracy:±0.5ºC)
Weight: about 35g
DESCRIPTION OF FUNCTIONS
The device can record 8640 temperature data at most, and the device automatically generates a PDF file after the recording is completed.
No LED flashes----Standby or dead battery
Green Light flashes----Recording, normal
Red Light flashes----Recording, abnormal, temperature is too high or too low, battery undervoltage, etc.
Blue Light flashes----Recording stop
NOTE:The flashing blue and green lights indicate that the recording is stopped and the temperature is normal.
The flashing blue and red lights indicate that the recording has stopped and the temperature is abnormal.Product Use Steps
NOTE:It is recommended to plug the device into the computer USB port for charging for 2 hours before each recording to ensure that the device is fully charged.
Step | Operation | Description |
1 | Device settings | 1. Plug the device into the computer; 2. After a while ,a USB flash drive named "PCsensor" will appear. 3. Open the U disk named "PCsensor"; 4. Find the "SETTING.HTM" file in the U disk. If you do not find this file, press the Start button of the device for 3 seconds, wait for the U disk to refresh again, and then find the "SETTING.HTM" file. Open the file, note that the file will be opened in a web browser; 5. Ensure that the browser script is loaded; 6. Set the parameters in the webpage; 7. Click Download to download the file to the U disk "PCsensor". |
2 | Start up | Press the device Start button for 3 s when you need to record. The green LED flashes, indicating that the device has been started and the recording is starting. |
3 | View data | Insert the device into the USB port of the computer, find the U disk name "PCsensor", and open the PDF file inside. |
Device:
The device will stop recording after the device records full data or inserts the USB to view the data.
If you need to record data again, the setting steps are as follows:
1. Insert the device into the USB port of the computer, wait for the USB flash disk "PCsensor" to appear, and then press the Start button of the device for 3 seconds, the USB flash drive will disappear and then reappear after a while, then open the USB flash drive, there will be two files;
2. Open the SETTING.HTM file with a browser.
3. If you are prompted as indicated by the arrow in the figure above, "To help protect your safety, your web browser has restricted this file to display activities that may access your computer", then click on the prompt and select "Allow blocked content", Select "Yes (Y)" in the pop-up confirmation dialog box;
4. Fill in the parameters according to actual needs, and then click "Download", then a file download dialog box will pop up, select save, and then select the save location, save the file to the U disk "PCsensor".
5.After the download is successful, a CONFIG.RD file will be added to the U disk, which means that the setting is successful6. Remove the device from the computer after the setting is successful , the device will enter the sleep mode, the LED light no longer flashes, when the user needs to record, press the Start button for 3 seconds, the device will start recording, the LED light flashes once every 3 seconds.
Setting parameter description:
Logger ID: Device ID number, cannot be modified
Unit: Unit selection (Celsius or Fahrenheit)
Date Format: Date display format
Time Interval: Temperature recording interval
Delay time: Start delay
Upper limit: Temperature upper limit alarm value
Lower limit: Temperature lower limit alarm value
LEDs Flashing: Whether to allow LED flashing
UTC offset: Time zone selection
Note1 ~ Note5: You can fill in some remarks
For example, "Shenzhen to Shanghai", "The operator is Jason"etc., these information will be displayed in the Note area of the PDF document.
Start Record:
After setting the parameters, the device will enter the standby state. Press and hold the Start button for 3 seconds to start the device (the red light flashes for 3 seconds and then the green light flashes to indicate successful startup).
View Data:
Insert the device into the computer's USB port(the device will stop recording after plugging it into the computer, and it will not continue
recording after unplugging it. If you need to record again, you need to reset the parameters), after a while, a USB flash drive "PCsensor" will appear on the computer , There is a PDF document, which is the document of the recorded temperature data. The first page of the PDF document includes the recorded temperature curve and some information about the recording process.
Over the red dotted line in the graph indicates that the temperature is higher than the upper limit alarm value set by the user;
Lower than the blue dotted lineindicates that the temperature is lower than the lower limit alarm value set by the user;
the part between the red and blue dotted lines is the normal temperature, and the PDF document except the first page is a detailed record of temperature data.
Official website:http://pcsensor.en.made-in-china.com
Address:
4 / F, South, Building C, China Unicom Thai Industrial Zone, 271 Liangbai Road, Liangan Tian, Pinghu Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Arts & Crafts, Auto, Motorcycle Parts & Accessories, Computer Products, Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Lights & Lighting, Manufacturing & Processing Machinery
Company Introduction:
Shenzhen RDing TECH Co., Limited was established in 2010, headquartered in Longgang District, Shenzhen, is committed to the research and development, production and sales of high-tech electronic software products. With more than 20 patents, the products are exported to worldwide and have received unanimous support from customers.
The company has a complete research and development team, mechanical design, electronic design, firmware development, computer software, mobile phone software, all independently developed by the research and development team, in-depth control, professional tailor-made products for customers. At the same time, it has complete production and processing equipment, injection molding machine, patch machine, reflow welding, CNC numerical control machine tool, etc., from raw material processing and molding shell, from electronic parts to electronic control board production and other important core components are independently produced, each component is assembled and molded in the assembly workshop, product quality layer by layer inspection check, control The reliability of the product, only for customers to experience good quality products. With excellent sales team, to provide customers with professional and complete pre-sales and after-sales service.
Main products: Foot switch control, temperature and humidity detection, network remote control, customer customized products.
Shenzhen RDing TECH Co., Limited has unique achievements in electronic measurement and control, industrial control software industry. Ading Science and Technology has always adhered to the principles of independent research and development, innovative design, independent production and testing, and insisted on making innovative scientific and technological products.